Bench ROTARY Professional Drill GRINDER

CUTT, TRIM, DRILL, GRIND, POLISH, ENGRAVE.

New Full Set with Heavy Duty Flexible Shaft Model TM-2E

Voltage: 230V/50HZ
Phase: Single
Input Power: 300W
Variable Speed Control: 0-8500RPM
Flexible Shaft Collect: 1~6m
Flexible Shaft Length: 97cm
Grinding Wheel Size: 75mm x 20mm
Grinding Wheel Arbor Hole: 10mm

If there is one tool that can do nearly everything, it's the rotary tool. This multi-tasking tool should be one of your first investments for the wide variety of tasks it can perform. Here are just a few of the things you can do with a rotary tool and accessories.(And there are probably a hundred more things I don't have room to list) Just see pictures below.

PERFECT FOR WORKING WITH ALL TYPE OF MATERIALS.
Perfect for DRILLING
Perfect for ENGRAVER
Perfect for POLISHING
Perfect for GRINDING

Use for PC Modding, Grinding, Cutting, Sharpening, Sanding, Polishing, Drilling & many more.. Applicable to any type of materials Glass, Wood, Plastic, Ceramic, Metals & many other materials.

Large Accessories Set: Flex-shaft Attachment, Thread Tip Mandrel, Screw Mandrel, High-Speed Cutters, Wire Brushes, Bristle Brushes, Sanding Accessories, Polishing Accessories and more..

USE FULL IN EVERY WAY

Does all the job :

Let's start out with the carbide or high speed steel burr. I use these to "whittle" the basic shape of the handle, especially in smaller areas where my belt sander won't reach. You can use these to shape the brass or nickel silver guards also. Use a light skimming motion--these are aggressive and will dig in if you use any pressure. Especially the carbide ones. I call it "whittling".

You can also use the carbide rasps to enlarge pin holes or the slot in a guard. ( For guard slots though, use a file to finish up to get a good, flat side). The carbide rasps are strong enough to shape hardened steel, but go slow.

Small as they are, the sanding drums can be used to finish shaping the handle. (Actually though, I always recommend hand sanding as your final step). I typically use a lower speed--these go so fast they can burn the wood. They wear out fast but fortunately they are economical and easy to replace.

Cutting disks, in addition to cutting bar or rod stock are also useful for roughing up the shiny metal surface of the tang, to give the glue something more to bite into. I like the slightly larger fiberglass reinforced ones--they hold up a lot longer and aren't as brittle.

These cutting disks can also be used to profile a blade blank, getting it to the right shape before going to the grinder. It's a slow process and you'll eat up a few disks, but it's sure a lot easier than using a hacksaw. In this photo I'm modifying the tip of a tanto blade I was working on.

Great Job for drilling any holes on any item you want..

Great for buffing, Sanding anything rusty, or just removing any stains, or any dirty build ups on your valuable items..

Grind / Cuts anything you need too, useful for fine work or for all hobbist... For ordinary trimming, polishing & grinding.

Although it won't replace the buffing wheel on your grinder, those little buffing wheels are great for polishing small areas or items.

 

POSTED PRICE IS STILL SUBJECT TO 12% VAT!



Domestic sales and dealership and Export/Import inquiries are welcome, please contact the following:

Unit 79, Grace Park Commercial Complex
4th Ave. West bet. J. Teodoro & A. Del Mundo Streets
Grace Park, Kalookan City 01406
Metro-Manila, NCR, Philippines
Tel. Nos.: 63 2 263 0794
Mobile No./SMS: 63 920 969 2672
E-mail Address: gadgetsandgears@yahoo.com
Yahoo IM: BrandPhilippines
Skype: BrandPhil1
URL: GADGETSANDGEARS.com